20L Rotary Evaporator w Motorized Lift 220V

Laboratory equipment rotary evaporator is mainly used for continuous distillation of a large number of volatile solvents under reduced pressure conditions. In particular, the reaction product can be isolated and purified by concentrating the extract and distilling the receiving liquid upon chromatographic separation. The basic principle of rotary evaporator is vacuum distillation, that is, under reduced pressure, the distillation flask is continuously rotated hen the solvent is distilled.

BRE-200 Rotary Evaporator MANUAL INSTRUCTION

Features:

(1) Solvent Resistant, Reliable Performance
Made with all PTFE valves for solvent-resistant operations. Comes with vertical glassware and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. The condenser unit has specially designed glass tubes that utilize surface area extremely efficiently.

Simple, straight-forward operation using our digital PID controller. Easily control the temperature, RPM, and water bath with expert precision.

(2) Digital Water Bath
Operates from ambient temperature to 99C (210F) with PID temperature control stepping at 0.1C increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut down power if a problem is detected.

(3) Standard Glassware Set
All glassware is high borosilicate glass 3.3! Includes a 2L pear-shaped evaporating flask, 1L round-bottomed receiving flask, and vertical condenser.

Specification:

Note: This product is available with a recirculating chiller and a corrosion-resistant diaphragm pump!

Operating panel:

(1) TIMETime display windowWhen the controller is in a timed state, “TIME” will display the running time (countdown)
(2) REVMeasured speed window;
(3) TEMP: Measured temperature window;
(4) RUNHeating or rotating indicator, it will display when in heating or rotating status;
(5) Heating indicatorIt will display when there is a heating output;
(6) REV SET: Display setting speed, or display parameter value;
(7) TEMP SET: Display setting temperature, or display parameter value;
(8) Rotating indicator: Lights when rotating;
(9)”“Key: turn on or turn off rotation function;
(10)”” Key: adjust the height of the host, press and hold this key can raise the water bath automatically;
(11)”“Keyadjust the host height, press and hold this key can lower the height of water bath automatically;
(12)”” Key: turn on or turn off heating function;
(13)Knob key: Rotate left and right to set the time, temperature, and speed values.

Package includes: